Wind Speed Sensor - WindObserver 65
The Gill WindObserver 65 is a precision, solid-state ultrasonic anemometer providing wind speed and direction data via 1 digital and 3 optional analogue outputs and features an IP66 rated stainless steel housing, which is particularly suitable for use in salt-water environments.
Offering a high wind speed measurement range, this anemometer has an optional de-icing system enabling the sensor to operate effectively in environmental conditions experienced at high altitude or at sea and is recommended for use in aviation, marine and offshore applications.
Heated Anemometer Technical Information
- Key Features
- Specifications
- Documentation
- Part Numbers
- Precision Ultrasonic Anemometer
- Optional de-icing system
- 0-65m/s Wind Speed
- IP66 rated stainless steel construction
- 0-359° Wind Direction
- Optional base mounts/cable exit
- Free data logging software
- Averaging/gusts to WMO guidelines
Wind Speed
Range
0-65m/s (0-145mph)
Starting Threshold
0.01m/s
Accuracy
±2% @12m/s
Resolution
0.01m/s
Offset
±0.01m/s
Wind Direction
Range
0-359º
Dead Band Direction
None
Accuracy
±2º @12m/s
Resolution
1º
Measurement
Ultrasonic Output Rate
1Hz, 2Hz, 4Hz, 5Hz, 8Hz or 10Hz
Parameters
UV, Polar, NMEA, Tunnel
Units
m/s, knots, mph, kph, ft/min
Averaging (selectable)
Rolling average - 1, 2, 10 min, Gust - 3s
Block Average
0-3600s
Digital Output
Communication
RS422 / RS485 full duplex / half duplex
Baud Rates
1200, 2400, 4800, 9600, 19200, 38400
Formats
8 bit data; odd, even or no parity
Anemometer Status
Supplied as part of standard message
Power Requirement
Anemometer only
9-30 VDC (40mA @12VDC)
Heating (optional)
3A @24 VAC or DC
Sonic Temperature
Range
-40ºC to +70ºC
Analogue Output - Optional
Quantity
3 (speed, direction, status or sonic temp)
Scale
Multiples of ±10m/s up to ±70m/s
Type
±2.5V, 0-5V or 4-20mA
V output resistance
60 Ohms
4-20mA loading
10-300 Ohms
Mechanical
External Construction
Stainless Steel 316
Size
381mm x 213mm
Weight
1.4kg
Environmental
Protection Class
IP66 (NEMA4X)
Humidity
0ºC to 100% RH
Operating Temperature
-55ºC to +70ºC (heated option)
Precipitation
300mm/hr
EMC
EN60945:2002, EN61326-1:2013
Icing
MILSTD810F Method 521.2 Procedure I
Approvals
Standards
Traceable to NAMAS standards
Site Calibration
None required. Integrity check unit (Zero wind) supplied as optional extra
Accessories
Pipe Mount
Contact Gill
WindView Software
Display/logging software
WindCom Software
Configuration, display and logging software
WindObserver Part Numbers & Options
All Gill WindObserver wind sensors follow the same part number convention, which is driven by the selected product options. Use the chart below to build your part number.
